Short Lead Time for Gasoline Generator Spare Parts Connecting Rod - Chucks with or without Hydro-cylinder – Special Metal Detail:
Chocks
Weight: 3~20T
Applicable device: mill parts
Application: Cement, electricity, metallurgy, chemical and others
Customizable: Yes
Introduction
Bearing chock plays an important role of fixing bearing and bearing weight. It is the core part of rolling bearing. Its main function is to support the whole bearing structure.
Bearing chock works under low speed and heavy load for long time. So its reliability is the most important feature. To achieve this feature, it must require good quality of bearing chock.
Our main material for the bearing chock is similar as following
Standard Specifications for Cast Steel SCW480 |
||
Country |
Standard |
Grade |
China | GB/T 11352-1989 | ZG20SiMn |
United Kingdom | / | / |
USA | AISI/SAE | UNS J02505 |
Japan | JIS-G5102 | SCW480 |
Germany | DIN 17182 | GS-20Mn5 |
International | / | / |
Advantage
1. Fine material, high level of wear resisting
SHANGHAI SPECIAL METAL CO., LTD uses SCW480 to produce bearing chock, to ensure products’ quality. Through the test of practice, bearing chocks produced by SHANGHAI SPECIAL METAL CO., LTD can work well under long-time, heavy load operation with small wear loss.
2. Equipped with monitoring devices, can get operation condition at any time
Below bearing chock, there’s an oil leveler. Operator can view oil level at any time, supplement oil in time, avoid poor lubrication and bearing damage lead from oil lacking.
3. Reasonable structure, good for long-time and stable operation
Removed outside top cover, this design avoids dusts go into bearing box, improves bearing’s working life, and secures its work.
4. Holes of cylinder-oil with the degree of finish Ra 0.02
Production Process
1. Wooden pattern Production
2. Molding
3. Pouring
4. First cleaning
5. Heat treatment – grinding (inspection)
6. Rough machining (inspection)-finishing machining (inspection)
7. Packing-delivering
Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:
• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
• Dimensional check supported with a “as-built“ sketch;
• Record of the heat treatment chart;
Pictures:
Product detail pictures:
Related Product Guide:
Twee gouden, één diamanten en één briljanten huwelijk (Aalst) | Single Stage Hammer Crushers
Oost-Vlaanderen toont zijn rechtse rand (Gent,Aalst,Ninove) | Copper Foil Manufacturing Facilities
Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for Short Lead Time for Gasoline Generator Spare Parts Connecting Rod - Chucks with or without Hydro-cylinder – Special Metal, The product will supply to all over the world, such as: Cairo , Plymouth , Estonia , We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Elva from Curacao - 2015.10.01 14:14
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Lilith from Casablanca - 2015.06.12 16:22