Good User Reputation for Silicone Pig Baking Tool - Rope Sheave – Special Metal

Short Description:

Sheaves, Pulley in Cast Steel Expertise products made in China Product definition The product covered here is a dragging device which is installed in the derrick, and support the mine hoist, hoist support drag between the rolls to enhance the container, and guide the use of wire rope steering. Rope groove is with plastic lining or plastic block, which will increase the service life of wire rope. Material This material is the casting steel G42CrMo4 ISO14737:2003(E), which is a fully killed st...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for Rotary Kiln Spare Parts , Raymond Grinding Mill , Casting Iron Ladle , Special emphasis around the packaging of merchandise to avoid any damage during transportation,Detailed interest into the useful feedback and strategies of our esteemed shoppers.

Good User Reputation for Silicone Pig Baking Tool - Rope Sheave – Special Metal Detail:

Sheaves, Pulley in Cast Steel

Expertise products made in China

Product definition

The product covered here is a dragging device which is installed in the derrick, and support the mine hoist, hoist support drag between the rolls to enhance the container, and guide the use of wire rope steering. Rope groove is with plastic lining or plastic block, which will increase the service life of wire rope.

Material

This material is the casting steel G42CrMo4 ISO14737:2003(E), which is a fully killed steel, vacuum-degassed and processed to a fine grain size structure with improved properties both in toughness and in elongation.

Chemical composition: (%)

Elements	C	Si	Mn	P	S	Cr	Mo	Ni	V	Cu
Required	0.38-0.45	≤0.6	0.6-1	0.025	0.02	0.8-1.2	0.15-0.25	≤0.4	≤0.05	≤0.3

Mechanical properties

Checked at room temperature in the delivery condition i.e. after completion of the quality heat treatment from cylindrical cast-on test blocks (∅ 60 mm x 250 mm) available on every Sheaves: both the sample preparation and the testing comply with ASTM A 370-96.

Properties	Yield strength	Tensile strength	Elongation	Impact Value
Required	≥650	≥790	≥10	27

Delivery condition: Hardening and tempering.

Manufacturing

All operations are carried-out at the in-house foundry plant.

Molding

The castings are manufactured in a workman-like manner as required in the German standard DIN EN

1599-1: August 1997, ruling the delivery conditions of castings. The molding is individually carried out within a modular flask by using a sand preparation based on resin bonding.

Melting

The melting is carried out in the oxygen steel plant ( 2 off 180 t BOF converters ); the ladle capacity allows a continuous bottom pouring process the speed of which is permanently controlled. The metal analysis is checked by using a computer linked spectrograph.

Heat treatment

Every sheave undergoes a combined quality heat treatment (Hardening and tempering) aiming both to grain refining and to stress relieving.

Rough machining

In order to meet the inside quality free of defect, we rough machine each sheave foe inner NDT control.

NDT testing

UT: ASTM A609 Level Ⅱ for the groove and boss center.

MT: 100% ASTM A125 level Ⅰ

Fine machining

Fine machine every sheave totally according to drawings.

Fettling and dressing

The castings are coated by antirust oil FPC-600 for transportation.

Delivery

Every sheave is packed well and ready for delivery.

Quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.

The standard documentation ensures the full traceability of every process step:

Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
Dimensional check supported with a “as-built“ sketch;
Record of the quality heat treatment;

Service philosophy

We endeavor to propose options in terms of design engineering in taking advantage of our double experience as manufacturer, always targeting the optimization of their service life.

Skill with sheave

Further information on delivery program as well as useful advises on product, design, material and application are provided by the customer service team of the foundry department: it will support you actively in helping you to elaborate the right solution.

Whenever you need assistance, please contact:

Emily Liu Phone: +86 13918839495 Facsimile: +86 21 33847960 Sales2@special-metal.com

Product detail pictures:

We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Good User Reputation for Silicone Pig Baking Tool - Rope Sheave – Special Metal, The product will supply to all over the world, such as: Mauritius , Tanzania , Durban , we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, now we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

Aluminum Anode Rod