Fast delivery Block Machine In Kenya - Riding wheel for rotary kiln – Special Metal

Riding wheel for rotary kiln

Weight：7~42T

Applicable device： Rotary Kilns

Application: Cement, metallurgy, chemical, construction industries, etc

Customizable: Yes

Product introduction 

Our main material for the Riding wheel for rotary kiln is similar to followings:

Advantages:

1. Large load bearing, good continuous operation performance

We CSM riding wheel are made from ZG55 and ZG42CrMo. This kind of material guarantee the quality of riding wheel, and also make riding wheel large loading bearing and good continuous operation performance.

2. Simple structure, convenient to adjust and maintain.

This kind of riding wheel uses rolling bearing wheel sets, and is simple in structure and convenient to maintain.

3. Heat treated through normalizing and tempering, hardness of riding wheel is higher.

We CSM apply normalizing and tempering heat, which makes riding wheel’s outer surface hardness higher than 200HB; guarantee the quality of riding wheel for rotary kiln.

 Production Process  

1. Wooden pattern Production  

2. Molding

3. Pouring

4. First cleaning

5. Heat treatment – grinding (inspection)

6. Rough machining (inspection)-finishing machining (inspection)

7. Packing-delivering

Quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:

• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;

• Dimensional check supported with a “as-built“ sketch;

• Record of the heat treatment chart;

Picture: