100% Original Pastry Silicone Mold - Rotary kiln tyre – Special Metal

Rotary kiln tyre

Weight: 5~80T

Applicable devices: rotary kiln type

Application: Cement, Metallurgy, chemical industry, building etc.  

Customizable or not: Yes

Product introduction 

Tyre is another name for rolling ring, which is the main part of rotary kiln. The function of tyre is to transfer the whole weight (including firebrick, interior device and material) to riding wheel to make barrel stably move round at riding wheel. Therefore, tyre should have excellent strength and wear resistance; meanwhile, it is the part to enhance radial stiffness of barrel, so it should have excellent stiffness

Our main material for the Rotary kiln tyre is similar to followings:

Advantage

1. High strength, excellent wear resistance

Shanghai Special Metal uses ZG45 and ZG42CrMo to cast rotary kiln tyre to ensure high strength and excellent toughness, which is good for supporting.

2. Adopting double medium quenching process while casting tyre to enhance the flexibility   

Shanghai Special Metal adopts advanced double medium quenching process and forges equally each part, which enhance the hardness and toughness to get high wear resistance to adapt all kinds of bad working conditions

3. Type has a simply structure. It is convenient to manufacture and to do routine maintenance

 Production Process  

1. Wooden pattern Production  

2. Molding

3. Pouring

4. First cleaning

5. Heat treatment – grinding (inspection)

6. Rough machining (inspection)-finishing machining (inspection)

7. Packing-delivering

Quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:

• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;

• Dimensional check supported with a “as-built“ sketch;

• Record of the heat treatment chart;

• Carry out NDT(Non-destructive Testing) inspection at least at level 2.

 Pictures