Sản phẩm giới thiệu
CSM Supplies good quality cast steel turbine blade. A turbine blade is the individual component which makes up the turbine section. Turbine blades are subjected to very strenuous environments inside a turbine. They face high temperatures, high stresses, and a potentially high vibration environment. All three of these factors can lead to blade failures, which can destroy the engine, and turbine blades are carefully designed to resist those conditions. To survive in this difficult environment, turbine blades often use exotic materials like superalloys.
Quy trình sản xuất
1. Sản xuất mô hình bằng gỗ
2. Đúc
3. Đổ
4. làm sạch đầu tiên
5. Xử lý nhiệt - nghiền (kiểm tra)
6. gia công thô (kiểm tra) công -finishing (kiểm tra)
7. Đóng gói-cung cấp
Đảm bảo chất lượng
Các tuyến đường chế tạo được điều chỉnh bởi các quy định của triển khai Hệ thống chất lượng ISO 9001: 2000. Các tài liệu tiêu chuẩn đảm bảo truy xuất nguồn gốc đầy đủ của tất cả các bước xử lý:
• Giấy chứng nhận sản xuất thử nghiệm theo tiêu chuẩn DIN EN 10,204 § 3.1 bao gồm cả thành phần hóa học, tính chất cơ học và kiểm tra không phá hủy;
• kiểm tra Dimensional được hỗ trợ với một “như xây dựng” phác thảo;
• Ghi lại các bảng xếp hạng xử lý nhiệt