Vertical mill hub
Weight: 5~30T
Applicable devices: all types of vertical mills, mineral slag vertical mills, cement vertical mills, steel slag vertical mills, nickel slag mills, raw material vertical mills and coal vertical mills.
Application: Cement, building material, chemical, coal, electricity, metallurgy, non-metallic mine, etc
Customizable: Yes
Product introduction
Hub is the core part of grinding roller. Roller shell is fixed on hub, and hub is installed on roller shaft, then they make up a set of grinding roller. Generally, between roller shell and hub, there’s a cone structure, to ensure the convenience of maintenance and dismounting.
Our main material for the Vertical mill hub is similar to followings:
Standard Specifications for Cast Steel ZG270-500 |
||
Country |
Standard |
Grade |
United Kingdom | BS3100 | A2 |
USA | AISI/SAE | UNS J04000 |
Germany | DIN 1681 | GS-60 |
Japan | JIS-G5101 | SC480 |
International | ISO 3755 | 270-480 |
Advantage
1. Casted hubs from Shanghai Special Metal Co., Ltd are wear resisting and not easy to crack.
2. Shanghai Special Metal Co., Ltd insists: before delivery, professional QCs should do NDE inspections several times on hub’s stress face, refuse any inferior products to be delivered.
Production Process
1. Wooden pattern Production
2. Molding
3. Pouring
4. First cleaning
5. Heat treatment – grinding (inspection)
6. Rough machining (inspection)-finishing machining (inspection)
7. Packing-delivering
Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:
• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
• Dimensional check supported with a “as-built“ sketch;
• Record of the heat treatment chart;
Pictures: