Product introduction
CSM Supplies good quality cast steel turbine blade. A turbine blade is the individual component which makes up the turbine section. Turbine blades are subjected to very strenuous environments inside a turbine. They face high temperatures, high stresses, and a potentially high vibration environment. All three of these factors can lead to blade failures, which can destroy the engine, and turbine blades are carefully designed to resist those conditions. To survive in this difficult environment, turbine blades often use exotic materials like superalloys.
Production Process
1. Wooden pattern Production
2. Molding
3. Pouring
4. First cleaning
5. Heat treatment – grinding (inspection)
6. Rough machining (inspection)-finishing machining (inspection)
7. Packing-delivering
Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:
• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
• Dimensional check supported with a “as-built“ sketch;
• Record of the heat treatment chart
